fbpx bloglovinBloglovin iconCombined ShapeCreated with Sketch. Fill 1Created with Sketch. Fill 1Created with Sketch. Fill 1Created with Sketch. Fill 1Created with Sketch. Fill 1Created with Sketch. rssRSS iconsoundcloudSoundCloud iconFill 1Created with Sketch. Fill 1Created with Sketch. Fill 1Created with Sketch. Fill 1Created with Sketch. SearchCreated with Lunacy Search iconCreated with Sketch.

How To: Paint an Old Radiator

How To: Paint an Old Radiator

Your radiator carries a heavy load all winter keeping you warm and toasty, and it deserves a little love too to keep it looking its best. Painting an old radiator is not the same as slapping on some wall paint. It requires the right prep and a special kind of paint that will stand up to the high temps your radiator creates.

In this post, I’ll show you the right steps and materials to get an attractive and lasting paint job on your old cast iron radiator. My friend Natalie over at Earth+Flax was kind enough to help me out with some great pics of the process! Also, keep in mind that the mechanics of your radiator (while simple) need some upkeep as well. If it’s mechanical issues you are looking to resolve, then check out my post How To: Bleed a Radiator.

How to Paint an Old Radiator

There are two ways you can go when it comes time to paint an old radiator. If you feel up to removing your radiator and you are certain you won’t be needing it for a while, you can bring it to a sandblasting company to have a very thorough cleaning of the surface, but most times I find that is unnecessary. If you don’t want to go the full monty, be sure to read up on how to safely disconnect your radiator from your heating system first.

If you are painting in place follow the steps below:

Step #1 Protect the Area

Some of the chemicals and paints you’ll be using can be extremely difficult to clean up if they spill and can ruin your floors, so you want good protection down. I prefer to lay down some 6 mil plastic sheeting on the floors and walls in the area you are working and then put a canvas drop cloth over that. For the walls, you can also use cardboard since that is easier to stand up than a drop cloth.

Make sure your radiator will not be heating up during the painting process because it could cause burns to you or damage to the coating before they are cured.

Step #2 Cleaning & Remove Paint

metal bristle brush

You don’t need to remove all the paint from your radiator, only the loose and flaking paint that is failing. I find that the best way to do this is with a stiff bristle metal brush and a bucket of TSP cleaner. Scrub the surfaces until all the loose paint and dirt is off and then dry off the surface with some rags.

Use the large metal brush for the easy to access areas and try a furnace boiler brush for some of the hard to reach nooks and crannies. Depending on the design of your radiator you may have to improvise what kind of brush you use but a metal bristle works best to really get that old paint off compared to a much softer nylon brush which really will accomplish very little.

Step #3 Treat the Rust

ospho

If you don’t treat the rust it will ruin your paint job in short order so don’t skip this step. Once the radiator is dry pick up a bottle of OSPHO and brush it across the surface using a chip brush or other disposable brush. Wear gloves for this since OSPHO is phosphoric acid and can cause burns after extended exposure. Make sure you hit all areas of rust thoroughly. The rusty areas will bubble and turn black if you’ve done it right. Let it dry overnight and then you’ll be ready for priming in the morning.

Nerd Alert Information: When applied to rusted surfaces, OSPHO causes iron oxide (rust) to chemically change to iron phosphate – an inert, hard substance that turns the metal black. Where rust is exceedingly heavy, two coats of OSPHO may be necessary to thoroughly penetrate and blacken the surface to be painted. A dry, powdery, grayish-white surface usually develops; this is normal – brush off any loose powder before paint application.

Step #4 Apply Primer

painting radiator

There are a few different products on the market and for DIY projects like radiators. I lean toward Rust-Oleum since they are easy to use and readily available. You have two options: spraying or brushing and we’ll talk about them in a sec. Which ever primer you choose make sure it is 2 things: oil-based and made for high-heat. My preference for spray primer is Rust-Oleum Engine Primer.

If you can get proper ventilation and protection of the surrounding walls and floors, then spraying is a better option for getting a smooth even coat and makes getting into the hard to reach areas a lot easier. Brushing may take longer and be a little more difficult, but sometimes you don’t have the right setup for spraying and that’s when brushing is best. For getting into tight spots, I recommend testing a few creative application options before you start.

Step #5 Time to Paint

Your primer is dry and it’s time to finish the project. Pick another high-heat, oil-based paint like Rust-Oleum Engine Enamel and you’re ready to go following the same process as your primer. Make sure you don’t paint any of the valves, as they may stick and be difficult to open. Give it ample time to dry and good ventilation before turning the heat back on and you’re good to go!

An Alternate Type of Paint

There is another type of paint you may want to consider for your old radiator, and that is linseed oil paint made by Allback. It is an old school type of paint that doesn’t require a primer (so that’s a time saver!), but it must be applied with a brush. Linseed oil paint is heat treated during it’s manufacturing process so it has no problems being applied to a radiator.

Linseed oil paint is a more natural paint with less solvents and all around a healthier option to paint with that some people seem to enjoy. You can find out more about Allback and their paints here.

Subscribe Now For Your FREE eBook!

10 thoughts on “How To: Paint an Old Radiator

  1. Scott,

    I have 100 year old radiators that I want to paint the color of my walls. What paint tint should I use to match the walls? I can’t move the radiators to spray them.

    Thanks

    Lorraine

  2. Hi Scott,

    I noticed that the type of primer and paint you recommend in the article is designated for car engines. Do you think it is safe for indoor use?

    There is also a high heat spray paint from the same maker that is designated for grills and indoor use. What do you think about it?

  3. I bought a 1927 house and has to paint all radiators, most had wall paint on them and various awful colors too! I brought all of the radiators outside on a sunny day and placed each one on scrap plywood. I rented a pressure washer and stripped them all 90 percent clean followed by an immediate drying with a leaf blower and direct sun. The advantage of the washer was decades of caked on dust in the middle ribs were also removed. Drying is critical however, not to be taken lightly as oxidation waits for no one. I sprayed with an HVLP sprayer for speed and to reach those inner ribs.

    1. How did you lift them? I am worried about pulling my back AND if I detach and they stop working. Any advice?

  4. My radiators are about 100 yrs old. The metal is not smooth sort of a rough surface almost porous

    Is there any additional prep required?

  5. Scott,

    Is there an issue with odor from the Allback paints on a radiator?

    Also, have you used this product for radiator projects?

    Thanks
    Todd

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.